¶ Featured post

Biodegradable Plastic: What’s New?

Written by Admin

Basically there are three products available on the Biodegradable plastic industry. The Oxo -degradables, BioAdictives and the BioResins. A point to note is that there are many advantages of using them. On the other hand the products can be limited in its usefulness in particular areas.

Oxo-degradables products are mainly used in regions prone to heat, strong air, light and sometimes mechanical pressure. Such weather conditions are known to cause the plastic to disintegrate into non plastic particles which are known as diols. Oxo-degradables products are not easy to break down and are not considered to be a biodegradable plastic solution.

Biodegradable plastic industry is the BioAddictives. Such products can be tested using the ASTMD5511-11 method. These products have been marketed cross the world. The above testing method is basically used in regions with less oxygen. Such process ensures that the product is not completely broken down into pieces but it its original shape is maintained. The only notable change is in the weight of the plastic which greatly reduces with use.

Tips To Help You Get Your Car Repaired

Written by Admin

Your car is one of your most important possessions. So, if it were to break down or a problem were to occur with it, you want to make sure you get the best repairs possible. In the following article from http://www.nouvalari.com/, you will be given advice to ensure your repairs go smoothly.

When you run into car problems, you should first turn to the Internet to learn what the problem could be. You may find that it is an easy to repair problem that you can do on your own. This could save you hundreds of dollars in labor fees if you had to take it to a shop.

When taking your car to a repair service, make sure that you have all documentation handy. This is important as you do not want the mechanic to do tasks that have already been performed on your car. This can help you save a lot of time and money with your repair.

Keep a record of all the repairs you make on your vehicle. Having detailed records will be useful if you need to perform more repairs on your vehicle. If you don’t have these kinds of records it could cost you more because you won’t be able to locate the problems quickly.

Know your car before taking it in for any auto repairs. If you have little knowledge on the specs of your model car, you may end up being taken for a ride without you knowing it. Read through your manual at the bare minimum before going for any larger repairs.

Listen for any strange noises that your car may be making. These may be popping sounds, knocks, squeals, or something else. They are definitely symptoms of some sort of issue that needs auto repair. Keep a log of when you hear them, and note the type of driving you were doing when they occurred. It will help the auto shop diagnose the issue properly.

Remember that you don’t have to go to your dealer to get auto repair work done. Good mechanics can be found elsewhere, not only at the dealer’s shop. Trust someone that you’re comfortable with.

Replacing a charcoal canister is very expensive, but you can easily replace this part yourself. Take off the wheel located under your fuel tank and disconnect the vacuum lines connected to the old canister. The part should then come right off. Install the new one and connect the lines very carefully before installing the wheel again.

Before you pay the bill for any larger auto repair work, give your car a test drive. You want to make sure that the repairs were done to your satisfaction. If you haven’t paid, it makes it much easier to talk about any lingering issues that may still be around that need further fixing.

In the beginning of this article, your vehicle probably means a lot to you. Therefore, should something happen to it, you need to get the best repairs possible in order to get it up and running again. Allow the tips from this article help you get those repairs as soon as you need them!

Packaging Machines Explained

Written by Admin

The process of packaging involves many different processes. From the primary packaging itself, to the outer packaging, and the method use to pack it. Many of these processes mean that eco friendly options can be chosen, to ensure that no damage is being done to the earth, with all the plastic and plastic strapping. Experts in packaging machines at www.countypack.co.uk believe that this technology is always advancing, in particular, aiming to be more environmentally friendly.

Packaging machines

Packaging machines

Packaging materials range a fair bit, depending on what type of product you want wrapping. This can also be dependent on budget, and how it will be distributed. Packaging machines can also vary depending on the industry, whether food and drink, or electricals, will vary greatly on the process used. A few examples of packaging machines:

  • Cartoning machines – These packaging machines are one of the most common. These machines are most often used for goods in the food industry, for toiletries, household goods etc.
  • Coding machines – These are for putting codes and markings onto packaged products. These machines tend to be more complex, as they hold database information such as sequenced barcodes. This type of information stops counterfeit of goods, as each number or barcode is unique.
  • Conveying systems – are machines that carry bulk products from one area to another. These help efficiently carry heavy goods around places like warehouse, where carrying them would take too long/or they would be too heavy.
  • Filling machines – are ideal for filling predetermined amounts into containers, whether that be liquid, gas or powders. This makes the job that much more easier, than doing it by hand.
  • Food processing packaging – This details quite a lengthy process, as food requires more things to consider, such as hygiene. Food processing techniques may include, the peeling of skins from food, chopping, slicing, mincing, just to name a few.
  • Inspection machines – These can include manual or computerized checks to ensure that all packaging done on the manufacturing line is of correct standard, and to check that no mistakes have been made.

 

These are just a very few of the examples of packaging machines, and what they are capable of doing. Packaging machines allow many different industries to make their jobs more efficient. For more information on packaging machines, visit www.countypack.co.uk who are based at 17/5 Amber Business Centre,
Riddings, Alfreton,
Derbyshire,
DE55 4BR

Common Uses for Pallet Wrap

Written by Admin

Experts in pallet wrap at www.countypack.co.uk believe that stretch pallet wrap plays an important role in the world. Many people do not realise that it plays an important part in delivering and transporting most products they use. Here is a list of products stretch pallet wrap is commonly used on.

 

Pallet Wrap

Pallet Wrap

1. Palletised Boxes – This is the most common thing that pallet wrap is used for. Boxes are often wrapped it this to be stored on pallets at a height, to ensure safety.

 

2. Canned Goods – This is a very common use for stretch pallet wrap. Beer and fizzy drinks producers often use high-speed machines to wrap these pallet loads.

 

3. Wood- Many firewood companies use bundling film to wrap and unitize wood bundles. The vented wrap allows moisture to escape the wood after being wrapped.

 

4. Furniture – Another very commonly wrapped item. Stretch pallet film, is a great way to keep the furniture protected during transportation

 

5. Carpet – Another product often used with bundling film. A very effective method of preventing the carpet from unrolling.

 

6. Windows – Each individual window is wrapped to protect during transportation to the install point. This will avoid any marks or scratches to the surfaces

 

7. Paper – Often uses a heavy gauged film, as it gets so heavy when stacked onto pallets.

 

There are many other products that fall under this list too. Many of our everyday products that we use are often stored and transported by using pallet wrap. It’s a cost effective way of keeping products secure, and offers many uses for retailers and distributers.